MPPT Charge Controller (IMC05/10/20)

MPPT Charge Controller (IMC05/10/20) IMC05/10/20 - Dimension

(IMC05/10/20 - Dimension)


  • Automatic identification of system voltage level.
  • Four stage battery charge technique ( Bulk, Float, Mains, Equalization).
  • Up to 98% power conversion efficiency.
  • Load output protected against over load and short circuit.
  • Protected against reverse polarity connection of the solar PV module and Battery.
  • State of battery charging indicated by LED.
  • Automatic temperature compensation.
  • Battery LVD Disconnection.



Model IMC - 05A IMC - 10A IMC - 20A
Nominal Battery Voltage 12V/24V (Auto Detection)
PV Open Circuit Voltage 50V @12V/75V @24V
Max. PV Short Circuit Current 05A 10A 20A
Max PV Input Power(12V) 75W 150W 260W
Max PV Input Power(24V) 150W 260W 500W
Boost Voltage 14.4V/ 28.8V @25°C
Equalization Charging 14.8V/29.6V @25°C
Mains Charging 14.4V/ 28.8V @25°C
Float Voltage 13.8V/27.6 V
Low Voltage disconnect 11.0V/22.0 V
Reconnect Voltage 12.8V/25.6V
Output Voltage 11.0~14.5V /22.0~29.0V
Self Consumption <10mA
Peak Conversion efficiency >96% (MPPT Tracking Efficiency 99%)
Max Charging Current 05A 10A 20A
Max Output Current 05A 10A 20A
Radiating mode Natural Cooling
LED indication System On, Charging, Load Error, Load Short circuit, Low voltage Disconnect, Overload
Protections PV Reverse Polarity, Battery Reverse polarity, Overcharge, Low voltage, output short circuit, Overload
Temperature Compensation ­16mV / °C
Operating Temperature 0 to 55°C
Power Terminals 6 mm² / 10AWG
Protection Category IP20 (IP68 Optional)
Remort Monitoring Uart (Optional)

Note:   *Specifications are subject to change without notice